Чек-лист обслуживания и диагностики

Категория：Обслуживание

Порядок проверки поверхности, процесса, эталона, питания и связи.

Slow response or deviation

Check contamination, bubbles, crystals, sample temperature and flow before comparing with a reliable reference sample. Recalibrate only after cleaning and diagnosis.

Fluctuating signal

Check pump pulsation, mixing, bubbles, level, stratification and installation position, followed by power, grounding, shielding and analog-loop interference.

Communication interruption

Verify address, baud rate, parity, wiring, termination and register reads; then check topology, address conflicts, shielding, grounding and gateway settings.